Electrohome DVRC802E User Manual page 17

Antenna connections
DVD/VCR TO TV CONNECTION
After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV.
Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow
the connection diagram.
This DVD/VCR has a single 75 ohms output for connection to a TV. If your TV has separate UHF and VHF antenna
inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for UHF and VHF reception.
75 ohms coaxial cable (supplied)
75 ohms coaxial cable
(supplied)
75 ohms coaxial cable
(supplied)
2H6P001A[E] P12-21
TV
UHF/VHF IN
TV
Splitter
75 ohms input UHF
75/300 ohms outputs
(not supplied)
VHF
TV
Splitter
UHF
75 ohms input
300 ohms outputs
(not supplied)
VHF
17
NOTE: If a UHF or VHF antenna is used,
set the TV/CABLE menu option
to the "TV" mode.
TV with single 75 ohms UHF/VHF an-
tenna input
NOTE: If a UHF or VHF antenna is used,
set the TV/CABLE menu option
to the "TV" mode.
TV with 300 ohms UHF and 75 ohms
VHF antenna inputs
NOTE: If a UHF or VHF antenna is used,
set the TV/CABLE menu option to
the "TV" mode.
TV with 300 ohms UHF and 300 ohms
VHF antenna inputs
6/28/05, 5:34 PM
17