Loading And Unloading A Cassette Tape - Electrohome DVRC802E User Manual

Loading and unloading a cassette tape

Use only video cassette tapes marked
• Cassettes marked "VHS" (or "S-VHS") can be used with this video cassette recorder However, S-VHS recording
is not possible with this model.
• This model is equipped with SQPB (S-VHS QUASI PLAYBACK) that makes it possible to playback S-VHS
recordings with regular VHS resolution.
• HQ VHS is compatible with existing VHS equipment.
Loading
Push the center of the tape until it is automatically in-
serted.
P
Automatic power ON
When you insert a cassette tape the VCR power will turn ON automatically.
Automatic playback
When loading a cassette tape without an erase prevention tab, playback will start automatically.
Unloading
You can eject the video tape while the unit is turned off.
1
Press EJECT on the unit or the remote control.
Automatic tape eject
This VCR will automatically rewind the tape when the tape has ended. And when the tape is rewound to its
beginning, the cassette tape will be ejected automatically.
To prevent accidental erasure
Remove the erase prevention tab with a screwdriver.
Erase prevention tab
Tape speed and maximum recording time
Tape Speed
SP (Standard Play)
2-2/3 hours
SLP (Super Long Play)
48
2H6P001A[E] P47-60
VCR
Screwdriver
T-160 T-120
2 hours
8 hours 6 hours
48
and .
Insert the cassette tape with its labeled side facing up
and the erase prevention tab positioned at your left. An
inverted cassette tape cannot be inserted.
Erase prevention tab
2
Remove the cassette tape.
To record again
Cover the hole with a piece of adhesive tape.
Adhesive
Tape
Video cassette tape
T-90
1-1/2 hours
4-1/2 hours
6/28/05, 5:36 PM
T-60 T-30
1 hour 30 minutes
3 hours 1-1/2 hours