Led Description - Netis NW5222008M1 User Manual

LAN Port: The port connects the AP to your PC. You can config your AP through
the connection.
Reset button: Resets your AP or resets the AP to the default login settings.
Antenna: The antenna used for wireless connections. You are able to rotate
the antenna to gain the best signal reception.
To reset the AP to the factory defaults, press and hold the Reset button for
more than five seconds. This clears the AP's user settings, including User ID,
Password, IP Address,
configurations will be replaced with the factory default settings)

3.2 LED Description

The following illustration shows the Wireless Access Point front panel:
Number LED
1 PWR
Wireless Access Point User manual
and Subnet
Figure 2
Light Status
ON This indicator lights green when the
Wireless
Page 5 of 36
mask. (Warning:
front panel
Description
AP is
your original
receiving power;