Naicon MULTISTATION 1000 Instruction Manual

Single-phase line interactive ups 1000va

Advertisement

Quick Links

Multistation
1000VA
Single-phase Line interactive UPS
Uninterruptible Power Systems

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MULTISTATION 1000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Naicon MULTISTATION 1000

  • Page 1 Multistation 1000VA Single-phase Line interactive UPS Uninterruptible Power Systems...
  • Page 2 WARRANTY Dear Customer, thank you for purchasing a NAICON product, which is safe, reliable and requires few maintenance action. Please, carefully read the manual in which you will find all the safety, installation and commissioning instructions, as they will serve for the UPS to last and work as long as possible. This manual describes the operating principle and the associated protection functions.
  • Page 3: Safety Instructions

    UPS is designed for supplying equipment such as computer, monitor, cash register, telephone system or similar. To supply any equipment different than above mentioned, please refer to your reseller or to call Naicon Service assistance for information  Don’t cover device’s air inlet, avoid direct exposure to direct sunlight or install it close to heating sources, in order to avoid any overheating of the unit.
  • Page 4: Product Introduction

    MULTISTATION 1000 UPS 1000VA PRODUCT INTRODUCTION This UPS is specially designed for PCs or similar equipment. Thanks to its light weight and compact design, it fits perfectly into small working environments. MULTISTATION series is equipped with the AVR function to stabilize the input voltage.
  • Page 5: Installation

    MULTISTATION 1000 UPS 1000VA INSTALLATION 3.1 Unpacking and verification Unpack the UPS. When opening the box, if UPS is damaged or dented don’t connect it to electrical network. Please call your reseller for product’s replacement. 3.2 Posizionamento Install the UPS in an environment that is free of excessive dust, corrosive gas and conductive contaminants Don’t use the UPS in environments where temperature and/or humidity are too high.
  • Page 6: Switch On And Switch Off

    MULTISTATION 1000 UPS 1000VA 3.5 Switch ON and switch OFF To turn On the UPS press the switch ON/OFF (1), to turn Off the UPS press again the switch ON/OFF (1). 3.6 Cold Start UPS is able to operate a cold start. To swith On the UPS when the electrical network is not present, simply press the ON/OFF switch (1).
  • Page 7: Technical Characteristics

    MULTISTATION 1000 UPS 1000VA 5 – TECHNICAL CHARACTERISTICS MODEL MULTISTATION 1000 NOMINAL POWER 1000VA / 600W Input Single-phase with GND connection Voltage 220Vac / 230Vac / 240Vac INPUT 162 – 290 Vac Voltage range Connections 1 x IEC Output Single-phase with GND connection Voltage Tolerance ±10%...
  • Page 8: Warranty

    Dear Customer, Thank you for purchasing a NAICON product. We hope that you be satisfied. If the product fails in warranty period, please contact your dealer or call +39 02 950031 or go to www.naicon.com/elsist. Before contacting your dealer or authorized service network, we recommend that you read the operating and maintenance manual carefully.

Table of Contents