Sunjoy L-CM057PST-B-CA Assembly Instruction

Sunjoy L-CM057PST-B-CA Assembly Instruction

Steel fireplace-b

Advertisement

Quick Links

Assembly Instruction
Steel fireplace-B
Item# L-CM057PST-B-CA

SAFETY INFORMATION:

Please read and understand this entire manual before attempting to assemble, operate or install the
product.

WARNINGS:

FOR OUTDOOR USE ONLY! NEVER LEAVE FIRE UNATTENDED! Do not allow children or pets near
the fireplace without supervision. The fireplace is not designed for cooking food.

CAUTIONS:

Burn only wood or charcoal in the fireplace. DO NOT use gasoline or kerosene to start the fire in your
fireplace. Use only an acceptable method of lighting the fire, such as match and lighter. DO NOT use this
unit on a wood deck or on combustible surfaces such as dry grass, leaves, mulch, etc. The fireplace
should be placed no closer than 5 feet from walls during use. DO NOT attempt to move the fireplace
while it is hot or in use. Do NOT put woods on the grill grate.

PREPARATION:

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble the
product. Contact customer service for replacement parts

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the L-CM057PST-B-CA and is the answer not in the manual?

Questions and answers

Summary of Contents for Sunjoy L-CM057PST-B-CA

  • Page 1 Assembly Instruction Steel fireplace-B Item# L-CM057PST-B-CA SAFETY INFORMATION: Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNINGS: FOR OUTDOOR USE ONLY! NEVER LEAVE FIRE UNATTENDED! Do not allow children or pets near the fireplace without supervision.
  • Page 2 Part List No. Description Chimney top Upper base Rear board Side mesh Door Handle Handle plate Grill Grate Grate Fire bowl Ash tray Base Poker Part List Part Description M6 Nut M6*15 Bolt M6 Washer M5*10 Bolt M5 Nut M5/M6 Wrench...
  • Page 3 Step 1: Step 2: Attach side mesh (D) to base (K) by using nuts (AA) and Connect rear board (C) and side mesh (D) by using bolts flat washers (CC). Do not fully tighten the connections in (BB) and washers (CC). Do not fully tighten the this step..
  • Page 4 Step 5: Step 6: Connect handle (F) and handle plate (F1) by using nuts Connect upper base (B) and side mesh (D) by using nuts (AA) and washers (CC).Fully tighten the connections (AA) and washers (CC). Fully tighten all connections. Step 8: Step 7: Open the door, put the grill grate (G), grate (H), fire bowl (I) on...

Table of Contents