Table of Contents
Advertisement
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the word you
want to add, press the 0 or Down key to display the
alternative words.
2. When you press the 0 or Down key at the last alternative
word, the display shows Add on the bottom line. Press the
Add soft key.
3. If necessary, clear the word using the C key and enter the
word you want to add using Alphabet mode. See page 47.
4. Press the OK soft key.
The word is added to the T9 dictionary and becomes the
first word for the associated keypress.
To enter periods, hyphens or apostrophes, press the 1 key.
●
T9 mode applies grammar rules to ensure that the correct
punctuation is used.
Example: The 1 key is used twice to display two
punctuation marks:
L
E
T
'
S
To shift the case in T9 mode, use the
●
three cases; Initial Capital (
Lower case (
).
You can move the cursor by using the Left and Right keys.
●
To delete letters, press the C key. Press and hold the C key
to clear the display.
Entering Text
46
E
A
T
.
key. There are
), Capital lock (
) and
Using Alphabet Mode
Use the 1 to 0 keys to enter your text.
1. Press the keys labeled with the letter you want:
- Once for the first letter
- Twice for the second letter
- And so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a different key.
When entering the same letter twice or a different letter on the
same key, just wait for a few seconds for the cursor to move to
the right automatically, and then select the next letter.
Refer to the table below for further details about the
characters available:
Characters in the Order Displayed
Key
Upper Case
Space
Lower Case
Entering Text
47
Advertisement
Table of Contents
