HER CHEE ATV-600 Service Manual page 104

Ch. 8 V-BELT DRIVING SYSTEM
Driven pulley spring
Measure the length of driven pulley spring. Replace
it if exceeds service limit.
Service limit: 119.5 mm
Driven pulley
Check following items:

If both surfaces are damaged or worn.

If guide pin groove is damaged or worn.
Replace damaged or worn components. Measure
the outer diameter of driven face and the inner
diameter of movable driven face. Replace it if
exceeds service limit.
Service limit: Outer diameter 40. 945 mm
Inner diameter 41.0 70 mm
Driven Pulley Bearing Inspection
Check if the inner bearing oil seal is damage.
Replace it if necessary. Check if needle bearing is
damage or too big clearance. Replace it if
necessary. Rotate the inside of inner bearing with
fingers to check if the bearing rotation is in smooth
and silent. Check if the bearing outer parts are
closed and fixed. Replace it if necessary.
8-15