Table of Contents
Advertisement
2. If you want to add or delete the bank to be searched, press
Note: At least one bank needs to be entered. If you disabled all the banks, the error tone beeps.
3. Press
to search down or
4. When the scanner stops on a transmission, quickly press either:
to stop searching to listen to the transmission.
HOLD/RESUME
to store the displayed frequency into memory.
PGM
5. To release the hold and continue searching, press
Note: To step through the frequencies while
Direct Search
You can search up or down from the currently displayed
frequency using direct search.
1. Press and hold
SRCH
OR
Enter the frequency you want to start from using the number keys,
•
press
to enter a decimal point, then press
Note: If you enter an invalid frequency, the scanner displays
Error.
Press
2. When the scanner stops on a transmission, quickly press either:
to stop searching and listen to the transmission.
HOLD/RESUME
to store the displayed frequency into memory.
PGM
3. To release the hold and continue searching, press
Note: To step through the frequencies while
Service Bank Search
You can search for ham, marine, aircraft, or police (fire/emergency) transmissions without knowing the
specific frequencies used in your area. The scanner is preprogrammed with all the frequencies allocated to
these services. To use this feature, press
searching. To select a different service bank, press 1/HAM, 2/MRN, 3/AIR or 4/POL.
Newly selected service symbol appears. Press
When the scanner stops on a transmission, quickly press either:
•
to stop searching and listen to the transmission.
HOLD/RESUME
to search up.
SRCH
appears during searching until the scanner stops.
.
・/CLR /DELAY
.
The current service symbol
.
SVC
corresponding the bank.
0 – 9
HOLD
.
HOLD/RESUME
HOLD
appears, press
SRCH
or
. .
HOLD
HOLD/RESUME .
HOLD
appears, press
to search down or
HOLD
appears.
or
.
appears.
appears.
or
.
appears and the scanner starts to
to search up.
appears.
Hide quick links:
Advertisement
Table of Contents
