Troubleshooting - Audi TTS Coupe 2015 Owner's Manual

Television
enter a password for approximately one mi­
nute. The password can only be reset by an
Audi workshop.
- Whether a digital signal for the child lock
activation can be received depends on the
broadcasting organisations.
AV settings
Applies to: vehicles with TV and external AV input
.,. Select: I MEDIA! button. Press the left control
button repeatedly until the source overview is
displayed.
.,. Select: AV> right control button.
Sound settings: Refer to q page 206.
-
- Video picture settings:
Picture for- Information
mat
4:3
The picture is set to a width-to-
height ratio of 4: 3. Black bars will
be shown on the edges of the info-
tainment display.
16:9
The picture is set to a width-to-
height ratio of 16:9. Black bars will
be shown on the upper and lower
edges of the infotainment display.

Troubleshooting

Overview
Applies to: vehicles with TV
Subject
No channel list is displayed after
TV tuner has been started.
The channel list is incomplete.
Poor/no picture/colour when con-
necting a portable player.
Restricted functionality of TV tu-
ner.
200
Brightness: The brightness can be increased/re­
duced.
Contrast: The picture contrast can be increased/
reduced.
Colour: The colour intensity can be increased/re­
duced.
AV Norm
You can set the AV standard
NTSC) for a device connected externally. The
same standard must also be set on the player. If
you select the wrong AV standard, the following
problems can occur: no picture or a poor picture
or no colour picture.
Advice
Change the location of your vehicle. Select and confirm the chan-
198.
nel list q page
Wait briefly or change the location of your vehicle. The channel
search runs continuously in the background, so the list will show
all the channels within reception range after a brief period.
Ensure that the device you are using is set to the same AV stand-
ard as the MMI qpage
Reset the TV tuner to the factory settings qpage
(automatic/PAL/
200.
203.