Audi TTS Coupe 2015 Owner's Manual page 198

Television
Pidure for· Information
mat
automatic
The MMI detects the picture for-
mat of the source and displays the
picture using the best possible
width-to-height ratio. Depending
on the source format and the info-
tainment display installed, black
bars may be displayed on the edges
of the picture.
4:3
The picture is set to a width-to-
height ratio of 4:3. Black bars will
be shown on the edges of the info-
tainment display.
16:9
The picture is set to a width-to-
height ratio of 16:9. Black bars will
be shown on the upper and Lower
edges of the infotainment display.
Brightness:
The brightness can be increased/re­
duced.
Contrast:
The picture contrast can be increased/
reduced.
Colour:
The colour intensity can be increased/re­
duced.
Programme guide:
- Further information on the
digital programme guide q
Seek:
- The previous/next receivable channel will
be set.
TV settings:
- Refer to q
Teletext: page 196.
- Refer to q
Operating teletext
Applies to: vehicles with TV
You can use the teletext function to receive cur­
rent information from TV channels.
Fig. 170 Teletext operating panel
196
page 197.
page 199.
Important: Teletext must be open q
Calling up the operating panel
(D
Turn the rotary pushbutton clockwise or anti­
clockwise.
Calling up content
@
To jump to the next/previous page:
-
finger up/down on the MMI touch pad.
To call up a page directly using a coloured key:
-
Select and confirm one of the coloured keys@.
The functions of the coloured keys depend on
the selected page.
To jump to the next/previous subpage:
-
your finger to the Left/right across the MMI
touch pad. If no subpage is available, the next
page will be called up.
®
Calling up the start page
Select and confirm the home key. The start page
depends on which TV channel is selected.
©
Switching the page refresh function on/
off
Select and confirm the stop key. The automatic
page refresh function (e.g. jumping to the next
subpage) will be switched on/off.
®
Changing the display option
To switch between display options, press and
conform the key for "Display options" repeatedly
until the desired display option is selected.
Transparent:
- Teletext will cover the whole
screen with the TV picture showing through in
the background.
Split screen:
- The TV picture and teletext will
appear next to each other.
Full screen:
- Teletext will cover the whole
screen, and the TV picture will not be visible.
Zooming in on teletext
@
You can enlarge the top or bottom half of a tele­
text page.
To switch the zoom on/off:
-
the zoom key@.
To switch between the top and bottom half:
-
Move your finger up/down on the MMI touch
pad.
page 195.
Move your
Move
Select and confirm
..,.