JVC KD-SH1000 Instructions Manual page 21

Indications
Bright
Display brightness
ID3 Tag
Tag display
Theme
Display theme
IF Band
Intermediate frequency
band
Beep
Key-touch tone
Ext In 2
*
External input
Tel
Telephone muting
Amp Gain
Amplifier gain control
* 1 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
* 2 Displayed only when one of the following sources is selected—FM, AM, CD, SD, USB, or LINE-IN.
Items Settings, [reference page]
1 – 10 [Initial: 8] : Adjust the display contrast to make the display indications clear
and legible. (If "Dimmer" is set to "On," selecting "1" to "4" takes
no effect.)
On [Initial] : Shows the Tag information while playing MP3/WMA tracks.
•
Off : Cancels.
•
• Large : Select the display theme for large graphic display, [5]. See page 22
(1 [Initial] or 2) for setting.
Small : Select the display theme for small graphic display, [5]. See page 22
•
(1 [Initial] or 2) for setting.
Auto [Initial] : Increases the tuner selectivity to reduce interference noises
•
between close stations. (Stereo effect may be lost.)
Wide : Subject to interference noises from adjacent stations, but sound
•
quality will not be degraded and the stereo effect will remain.
• On [Initial] : Activates the key-touch tone.
• Off : Deactivates the key-touch tone.
• Changer [Initial] : To use a JVC CD changer, [14] or an Apple iPod or a JVC D. player,
[24].
• Ext In : To use any other external component, [26].
• Muting 1/ : Select either one which mutes the sounds while using a cellular
Muting 2 phone.
• If CD/CD-CH/SD/USB/iPod/D. player has been selected as the
source, playback pauses during telephone muting.
• Off [Initial]
: Cancels.
• High PWR : Volume 00 – Volume 50
• Low PWR : Volume 00 – Volume 30 (Select this if the maximum power of the
speaker is less than 50 W to avoid damaging the speakers.)
• Off
: Deactivates the built-in amplifier.
21