Title Assignment - JVC KD-SH1000 Instructions Manual

Title assignment

You can assign titles to station frequencies,
CDs (both in this unit and in the CD changer)
and the external components (LINE-IN and
EXT-IN).
Sources Maximum number of characters
Station Up to 16 characters (up to 30
frequencies station frequencies including
bothe FM and AM)
CDs/CD-CH* Up to 32 characters (up to 30
discs)
External Up to 16 characters
component
* You cannot assign names to any discs other
than conventional CDs.
1
Select the sources.
• For FM/AM tuner: Select a station.
• For CDs in this unit: Insert a CD.
• For CDs in the CD changer: Select
"CD-CH," then select a disc number.
• For external component: Select
"LINE-IN" or "EXT-IN."
2
Enter the TITLE menu (see page 4).
3
Assign a title.
1 Select a character set.
A (A – Z: upper case) = a (a – z: lower
case) = 0 (numbers and symbols) =
Á (Accented letters: upper case) = á
(Accented letters: lower case) = (back to
the beginning)
• For available characters, see page 31.
2
Select a character.
3 Move to the next (or previous)
character position.
4
Repeat steps
finish entering the title.
4
Finish the procedure.
• To cancel the title entry
without registration, press
MENU.
To erase the entire title
In step 3...
1 3
and until you
23