Download Print this page
EROAD Ehubo Installation Manual
Hide thumbs Also See for Ehubo:

Advertisement

EROAD Ehubo
®
Installation Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the Ehubo and is the answer not in the manual?

Questions and answers

Summary of Contents for EROAD Ehubo

  • Page 1 EROAD Ehubo ® Installation Guide...
  • Page 2 Ehubo in your vehicle. Please make this Guide available to your installer and keep it for future reference. The Ehubo is easy to install by carrying out the following steps as described in this Guide: 1. Make sure to read the Safety Information section, familiarize yourself with the local laws regarding the installation and use of the Ehubo, and use and follow all standard safety precautions.
  • Page 3: Important Safety Information

    Please contact your nearest EROAD office if you • Only operate or look at the Ehubo when it is safe to do so. Do not message, change settings or require any further assistance.
  • Page 4 Choose a location that does not expose the Ehubo to excessive temperature or vibration.
  • Page 5 Finalize by following the onscreen instructions. After the checks are successfully When the vehicle is off, the Ehubo shuts down to a lower power mode and draws a very small completed, the Pending Assignment, or the Ehubo home screen (if unit is assigned to current from the vehicle supply.
  • Page 6 Finalize by following the onscreen instructions. After the checks are successfully When the vehicle is off, the Ehubo shuts down to a lower power mode and draws a very small completed, the Pending Assignment, or the Ehubo home screen (if unit is assigned to a current from the vehicle supply.
  • Page 7 The install wizard must be re‑run to completion on the new unit. carefully slide the cable plug off the Make sure the cable plug latch clicks At the end of the process, when the Ehubo Home screen is internal connector (W). into place to safely secure the plug.
  • Page 8: Troubleshooting

    Troubleshooting This section will provide some solutions if the installation of your Ehubo is unsuccessful or the Ehubo doesn’t perform as expected. SCENARIO SYMPTOM SOLUTION Permanent Power • Ehubo screen remains off • Check that Permanent Power is not connected has been properly connected to •...
  • Page 9 EROAD.COM Confidence in every mile.