Snmp Configuration - Delta DVW-W02W2-E2 User Manual

DVW Series Industrial IEEE 802.11 a/b/g/n Wireless AP/WDS/Client/Gateway User Manual
Bridge Priority
Each bridge is assigned a priority when they are running STP. After the devices
exchange BPDUs, the lowest priority value becomes the root bridge. Select a
number that is a multiple of 4096 and the range are between 0 and 61440.
Hello Time
Enter the time for the root of the Spanning Tree topology sends hello message.
For example, if the hello time is 2, the root of the Spanning Tree topology
_3
sends a "hello" message to other network devices every 2 seconds in the
network. The range is 1~10 seconds.
Forwarding Delay
Enter a waiting time for the device before checking the topology change or not.
The range is 4~30 seconds.
Max Age
If the device's waiting time for receive a hello message is over the Max Age,
then it will look itself as a root. The range is 6~40 seconds.
Enable RSTP
Enable or disable the interface to be a node in the Spanning Tree topology.
Port Priority
Specify the port priority. Lower number means the interface has higher priority;
higher number means the interface has lower priority.
Port Cost
Specify the port cost. Lower cost means the interface is more suitable to be a
node in the Spanning Tree topology.
Edge Port
Specify whether the BPDU go through the port. Check the port as an edge port
means no BPDU go through the port.

3.5.4 SNMP Configuration

Simple Network Management Protocol (SNMP) is an application protocol used for exchanging management
information between network devices. SNMP is a member of the TCP/IP protocol suite. SNMP V1, V2 and V3
are supported on the Delta DVW series. When the SNMP protocol version is V1, V2c. the authentication type
use a community string. When the SNMP protocol version is V3, then you need to specify the authentication
type. If you have data encryption requirement, you can specify the privacy type.
3-58
Description Factory Default
32768
2
15
20
Unticked
128
2000000
None