Basic Wireless Configuration – Client Mode - Delta DVW-W02W2-E2 User Manual


For the rest of the above mentioned countries: 36, 40, 44, 48
SSID
Specify the name of wireless device. It is not case sensitive. You can input 1 to
32 characters for SSID and space is also allowed.
SSID broadcast
Specify whether the SSID broadcast is enabled.

Enable: SSID can be broadcast.

Disable: SSID can't be broadcast.
Security mode
Please refer to section 3.4.2.6 Wireless Security Settings section.
Notice:
Before connecting the wireless device to the DVW series in the AP mode, please check if the network
environment is with the DHCP-Server. If not, please set the IP configurations of the DVW series to
DHCP-Server or manually set the IP address of the wireless device to the same network segment of the DVW
series. Otherwise, DVW series may not be able to connect to the wireless device.
3.4.2.2 Basic Wireless Configuration – Client Mode
If you configure the Operation Mode to Client Mode, the Site Survey button will be shown on the Basic Wireless
Configuration page. Click the "Site Survey" button and then a "Wireless Site Survey Table" will appear. It will list
all available access points nearby. Select one access point in the table for the DVW series to connect. This
allows two physically isolated networks to communicate with each other.
If you configure the Wireless to Disable, the Site Survey button will be grayed out.

Description
Chapter 3 Featured Function
Factory Default
DELTA_11NG
Enabled
None
3 - 4 1
3_