Acura NSX 2018 Owner's Manual page 94

MAINTENANCE
TABLE OF
CONTENTS
Engine Coolant
Park the vehicle on level ground. Check the reserve tank and the coolant level in the radiator. We
specify Acura Long Life Antifreeze/Coolant Type 2.
VISUAL INDEX
n Checking the Coolant Level
Make sure the engine and radiator are cool.
SAFETY
1. Open the hatch and remove the driver's side engine cover
INFORMATION
(see page 174).
2. If the coolant level in the reserve tank is below the MIN
mark, add the specified coolant until it reaches the MAX
INSTRUMENT
PANEL
mark.
3. Inspect the cooling system for leaks.
NOTICE
VEHICLE
CONTROLS
If temperatures consistently below −22°F (−30°C) are expected, the coolant mixture should
be changed to a higher concentration. Consult your authorized Acura NSX dealer for more
information.
AUDIO AND
CONNECTIVITY
BLUETOOTH®
HANDSFREELINK®
ACURALINK®
180 |
n
MAX
Reserve
MIN
Tank
Adding Coolant
Make sure the engine and radiator are cool.
1. Turn the reserve tank cap 1/8 counter-clockwise and
relieve any pressure in the coolant system. Do not push
the cap down when turning.
2. Push down and turn the cap counter-clockwise to remove
it.
3. Pour coolant into the reserve tank until it reaches the
MAX mark.
4. Put the cap back on the reserve tank and tighten it fully.
WARNING
Removing the reserve tank cap while the engine is hot can cause the coolant to spray out,
seriously scalding you.
Always let the engine and radiator cool down before removing the reserve tank cap.
NOTICE
Pour the fluid slowly and carefully so you do not spill any. Clean up any spills immediately;
they can damage components in the engine compartment.
MAINTENANCE
NAVIGATION
DRIVING
Reserve Tank
HANDLING THE
Cap
UNEXPECTED
MAINTENANCE
SPECIFICATIONS
CLIENT
INFORMATION
VOICE
COMMAND
INDEX
INDEX
| 181