Table of Contents
Advertisement
MAINTENANCE
TABLE OF
CONTENTS
Engine Oil
We recommend you check the engine oil level each time you refuel.
Checking the Oil
VISUAL INDEX
n
From inside the vehicle:
1. Display the Oil Level Check Assist in the driver
SAFETY
information interface (see page 47) .
INFORMATION
2. Run the engine until the Warm Up gauge is full.
INSTRUMENT
PANEL
3. Park on level ground and shift to Park (P). Idle the engine
until the Idle Time gauge is full and and the Ready to
VEHICLE
Check Oil Level message appears. Do not press the
CONTROLS
accelerator during this time.
AUDIO AND
CONNECTIVITY
4. Set the power mode to VEHICLE OFF. Start a two-minute
timer.
5. Open the hatch.
BLUETOOTH®
HANDSFREELINK®
ACURALINK®
176 |
From outside the vehicle:
1. Remove the passenger-side engine cover (see page 174).
2. When the two-minute timer completes, remove the
dispstick (orange loop), wipe it clean, and reinsert it (flat
side of loop toward oil fill cap).
3. Remove the dipstick and check the oil level. It should be
between the upper and lower marks. Add oil if needed.
When finished, select a different display in the driver
information interface.
Recommended Engine Oil
n
Use full synthetic, 0W-40 motor oil such as Ultimate
Full Synthetic Motor Oil, Type 3, 0W-40, available at your
authorized Acura NSX dealer.
NOTICE
Acura cannot ensure proper engine operation and durability if other engine oil is used.
MAINTENANCE
NAVIGATION
DRIVING
HANDLING THE
UNEXPECTED
Upper Mark
MAINTENANCE
Lower Mark
SPECIFICATIONS
CLIENT
INFORMATION
VOICE
Ambient Temperature
COMMAND
INDEX
INDEX
| 177
Advertisement
Table of Contents
