Table of Contents
Advertisement
HANDLING THE UNEXPECTED
TABLE OF
CONTENTS
If your vehicle is connected to another vehicle, start the assisting vehicle's engine and increase its
rpm slightly.
Attempt to start your vehicle's engine. If it turns over slowly, make sure the jumper cables have
VISUAL INDEX
good metal-to-metal contact.
WARNING: Battery posts, terminals, and related accessories contain lead and lead compounds.
Wash your hands after handling.
SAFETY
INFORMATION
INSTRUMENT
PANEL
A battery can explode if you do not follow the correct procedure, seriously injuring
anyone nearby.
Keep all sparks, open flames, and smoking materials away from the battery.
VEHICLE
CONTROLS
After the Engine Starts
n
Once your vehicle's engine has started, remove the jumper cables in the following order:
AUDIO AND
CONNECTIVITY
1. Disconnect the jumper cable from your vehicle's ground.
2. Disconnect the other end of the jumper cable from the assisting vehicle's (-) terminal.
3. Disconnect the jumper cable from the assisting vehicle's (+) terminal.
BLUETOOTH®
HANDSFREELINK®
4. Disconnect the other end of the jumper cable from your vehicle's (+) terminal.
Have your vehicle inspected by a nearby service station or an authorized Acura NSX
dealer.
ACURALINK®
150 |
WARNING
Overheating
If the temperature gauge needle is at the H mark, the engine suddenly loses power, or steam or
spray comes out from under the hatch, your engine is overheating.
Immediately park the vehicle in a safe place. Turn off all accessories and turn on the hazard
warning lights. Change the gear position to Park (P).
If no steam or spray is present: Keep the power system on and open the hatch.
If steam or spray is present: Turn off the power system and wait until it subsides. Then, open
the hatch.
Check that the cooling fan is operating and turn the power system off once the temperature
gauge needle comes down. If the cooling fan is not operating, immediately turn the power
system off.
Once the engine has cooled down, inspect the coolant level and
check the cooling system components for leaks. If the coolant
level in the reserve tank is low, or no coolant is in the tank, check
that the radiator is cool. Cover the reserve tank cap with a heavy
cloth and open the cap. Add coolant until it reaches the MAX
mark and put the cap back on.
Once the engine has cooled sufficiently, turn the power system on and check the temperature
gauge. If the temperature needle has gone down, resume driving. If it has not gone down,
contact an authorized Acura NSX dealer for repairs.
HANDLING THE UNEXPECTED
NAVIGATION
DRIVING
HANDLING THE
UNEXPECTED
MAINTENANCE
MAX
SPECIFICATIONS
MIN
Engine Coolant
Reserve Tank
CLIENT
INFORMATION
VOICE
COMMAND
INDEX
INDEX
| 151
Advertisement
Table of Contents
