Table of Contents
Advertisement
3. If the gear selector is not in PARK and the ENGINE
START/STOP button is pushed once, the instrument
cluster will display a "Vehicle Not In Park" message and
the engine will remain running. Never leave a vehicle
out of the PARK position, or it could roll.
4. If the gear selector is in NEUTRAL, and the vehicle
speed below 5 mph (8 km/h), pushing the START/
STOP button once will turn the engine off. The ignition
will remain in the ACC mode.
5. If the vehicle speed is above 5 mph (8 km/h), the
ENGINE START/STOP button must be held for two
seconds (or three short pushes in a row) to turn the
engine off. The ignition will remain in the ACC mode
(NOT the OFF mode) if the engine is turned off when
the transmission is not in PARK.
NOTE: If the ignition is left in the ACC or ON/RUN (engine
not running) mode and the transmission is in PARK, the
system will automatically time out after 30 minutes of
inactivity and the ignition return to the OFF mode.
ENGINE START/STOP Button Functions — With
Driver's Foot OFF The Brake Pedal (In PARK Or
NEUTRAL Position)
The ENGINE START/STOP button operates similar to an
ignition switch. It has three positions, OFF, ACC, RUN. To
change the ignition switch positions without starting the
vehicle and use the accessories follow these steps:
1. Starting with the ignition in the OFF position:
2. Push the ENGINE START/STOP button once to change
the ignition to the ACC position.
3. Push the ENGINE START/STOP button a second time
to change the ignition to the RUN position.
4. Push the ENGINE START/STOP button a third time to
return the ignition to the OFF position.
Keyless Enter-N-Go Starting Procedure — Engine
Manifold Air Temperature 0° F To 66° F (–18° C to 19° C)
NOTE: The temperature displayed in the instrument clus-
ter does not necessarily reflect the engine manifold air
temperature. Refer to "Instrument Cluster Display" in
"Getting To Know Your Instrument Panel" for further
STARTING AND OPERATING 119
4
Hide quick links:
Advertisement
Table of Contents
