Dodge RAM 1500 2018 Diesel Supplement page 110

108 GETTING TO KNOW YOUR INSTRUMENT PANEL
To check the remaining fuel filter life, go to the "Fuel Filter
Life" screen in the "Vehicle Info" menu. When this message
appears, dealers should replace the fuel filter.
NOTE: Use the steering wheel button controls for the
following procedure(s).
Vehicles Equipped With Passive Entry
1. Without pushing the brake pedal, push the ENGINE
START/STOP button and cycle the ignition to the ON/
RUN position (do not start the engine.)
2. Push and release the down arrow button to scroll
downward through the main menu to "Vehicle Info".
3. Push and release the right arrow button to access the
"Fuel Filter Life" screen.
4. Push and release the appropriate arrow button to access
the "Reset" screen.
5. Push and release the appropriate arrow to select the
reset of the Fuel Filter Life.
6. Push and release the up arrow button to exit the
instrument cluster display screen.
Vehicles Not Equipped With Passive Entry
1. Without pressing the brake pedal, cycle the ignition to
the ON/RUN position (do not start the engine.)
2. Push and release the down arrow button to scroll
downward through the main menu to "Vehicle Info".
3. Push and release the right arrow button to access the
"Fuel Filter Life" screen.
4. Push and release the appropriate arrow button to access
the "Reset" screen.
5. Push and release the appropriate arrow to select the
reset of the Fuel Filter Life.
6. Push and release the up arrow button to exit the
instrument cluster display screen.
NOTE: If the indicator message illuminates when you start
the vehicle, the Fuel Filter indicator system did not reset.
If necessary, repeat this procedure.
Diesel Particulate Filter (DPF) Messages
The Cummins diesel engine meets all diesel emissions
standards, resulting in one of the lowest emitting diesel
engines ever produced. To achieve these emissions stan-
dards, your vehicle is equipped with a state-of-the-art