Operation With Dvd And Video Cd; Playing A Dvd Or Video Cd; Moving To Another Title; Slow Motion - Zenith RC59000M Installation And Operating Manual

Operation with DVD and Video CD

Playing a DVD or Video CD

Playback Setup
Turn the TV on and select the video input source con-
nected to the VCR/DVD Recorder.
Audio system: Turn the audio system on and select
the input source connected to the VCR/DVD
Recorder.
1 1
Press OPEN/CLOSE to open the disc tray.
2 2
Load your chosen disc in the tray, with the
playback side down.
3 3
Press OPEN/CLOSE to close the tray.
READING appears on the display window, and
playback starts automatically. If playback does not
start, press PLAY.
In some cases, the disc menu might appear
instead.
ip
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which contains a menu.
DVD
Use the b B v V buttons to select the title/chapter you
want to view, then press ENTER to start playback.
Press TITLE or DISC MENU to return to the menu
screen.
VCD
Use the number buttons to select the track you want
to view.
Press RETURN to return to the menu screen.
Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on the each menu screen.
You may also set PBC to OFF under General menu.
See page 20.
otes
– If Parental Control is set and the disc is not within the
Movie Rating settings (not authorized), the 4-digit
code must be entered and/or the disc must be author-
ized (see "Movie Rating", on page 22).
– DVDs may have a Region Code.
Your recorder will not play discs that have a region
code different from your recorder. The region code for
this recorder is 1 (one).
30
ote
Unless stated otherwise, all operations described use
the remote control. Some features may also be avail-
able on the Setup menu.

Moving to another TITLE

DVD Video VR
When a disc has more than one title, you can move to
another title as follows:
Press DISPLAY and use v / V to select the title icon.
Then, press the appropriate numbered button (0-9)
or b / B to select a title number.
Moving to another CHAPTER/TRACK
DVD Video VR VCD
4/26
When a title on a disc has more than one chapter/track,
you can move to another chapter/track as follows:
Press SKIP (. or >) briefly during playback to
select the next chapter/track or to return to the begin-
ning of the current chapter/track.
Press SKIP (.) twice briefly to step back to the
previous chapter/track.
To go directly to any chapter/track during playback,
press DISPLAY. Then, use v / V to select chapter
icon (or for a Video CD, select track icon). Then, enter
the chapter/track number using the numbered buttons
(0-9) or press b / B.
ote
On a Video CD with PBC, you must set PBC to OFF in
the General menu to use this function. See page 20.

Slow Motion

DVD Video VR VCD
1 Press BACKWARD (m) or FORWARD (M)
during pause mode.
The VCR/DVD Recorder will enter SLOW mode.
2 Use the BACKWARD (m) or FORWARD (M) to
select the required speed: t 1/16, t 1/8, t 1/4,
t 1/2, or T 1/16, T 1/8, T 1/4, T 1/2.
With a Video CD, the Slow speed changes: T 1/8,
T 1/4 or T 1/2 (forward).
3 To exit Slow Motion mode, press PLAY.
ote
Slow motion playback in reverse is not possible with
Video CDs.
1/6
1/4