Audio - Zenith RC59000M Installation And Operating Manual

Before Operation (Continued)

Audio

Each DVD disc has a variety of audio output options.
Set the recorder's Audio Output according to the type of
audio system you use.
Dolby Digital
PCM: Select when connected to a 2-channel digital stereo
amplifier. The VCR/DVD Recorder's digital audio outputs
sounds in the PCM 2ch format when you play a DVD video
disc recorded on the Dolby Digital recording system.
Bitstream: Select "Bitstream" if you connected the
VCR/DVD Recorder's DIGITAL OUT jack to a Dolby
Digital decoder (or an amplifier or other equipment with
a Dolby Digital decoder).
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Vocal
DTS
OFF: If you select "OFF", the DTS signal is not output
through the DIGITAL OUT jack.
Bitstream: Select "Bitstream" if you connected the
VCR/DVD Recorder's DIGITAL OUT jack to a DTS
decoder (or an amplifier or other equipment with a DTS
decoder).
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Vocal
MPEG
PCM: Select when connected to a 2-channel digital
stereo amplifier. The VCR/DVD Recorder's digital audio
outputs sounds in the PCM 2ch format when you play a
DVD video disc recorded on the MPEG1, or MPEG2
recording system.
Bitstream: Select "Bitstream" if you connected the
VCR/DVD Recorder's DIGITAL OUT jack to a MPEG
decoder (or an amplifier or other equipment with a
MPEG decoder).
Sampling Freq. (Frequency)
If your receiver or amplifier is NOT capable of handling
96 kHz signals, select 48 kHz. When this choice is
made, this unit will automatically convert any 96 kHz
signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling
96 kHz signals, select 96 kHz. When this choice is
PCM
made, this unit will pass each type of signal through
Bitstream
without any further processing.
Prev. Select
D
With the DVD format, you can hear a program's sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
OFF
and the quietest ones). Then, you may listen to a movie
Bitstream
at a lower volume without losing clarity of sound. Set
DRC to ON for this effect.
Prev. Select
Vocal
Set Vocal to ON only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Vocal
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Vocal
ynamic Range Control (DRC)
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Vocal
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Vocal
PCM
Bitstream
Select
Prev.
48KHz
96KHz
Prev. Select
OFF
ON
Select
Prev.
OFF
ON
21