Nothing Appears On The External Monitor - Epson EB-L1755U User Manual

Problem Solving

Nothing appears on the external monitor

Check
Are images input from a port other than the Computer port or
BNC port?
Are you projecting a split screen?
Is the projector in standby status?
I want to change the language for messages and menus
Check
Change the Language setting.
Email is not received even if a problem occurs in the projector
Check
Is Standby Mode set to Communication On?
Is power being supplied to the projector?
Is the Mail Notification function set correctly in the Configuration
menu?
Only RGB signals from the Computer port or the BNC port can be displayed on an external monitor.
Only RGB signals projected on the left screen from the Computer port or the BNC port can be displayed on an
external monitor.
s "Projecting Two Images Simultaneously (Split Screen)"
Check that Standby Mode, A/V Output, and Monitor Out from the Configuration menu are set correctly.
s Extended - Standby Mode, A/V Settings
Adjust the Language setting from the Configuration menu.
s Extended - Language p.150
To use the Mail Notification function when the projector is in standby, set Communication On in Standby Mode from
the Configuration menu. Also, change the Port according to the network environment in which it is being used.
s Extended - Standby Mode p.150
Check that your electrical outlet or power source is functioning correctly.
An error notification email is sent according to the Notifications settings in the Configuration menu. Check if it is set
correctly.
s "Notifications menu" p.162
Remedy
p.107
p.150
Remedy
Remedy
202