Kia Optima 2017 Owner's Manual page 578

What to do in an emergency
4. Ensure that button (9) on the com‐
pressor is not pressed.
3
OJFA065013
5. Unscrew the valve cap from the
valve of the flat tire and screw fill‐
ing hose (3) of the sealant bottle
onto the valve.
7-26
OJF065024
6. Insert the sealant bottle into the
housing (5) of the compressor so
that the bottle is upright.
7. Ensure that the compressor is
switched off, position 0.
OJFA066038
8. Connect between compressor and
the vehicle power outlet using the
cable and connectors (4).
9. With the engine start/stop button
position on or ignition switch posi‐
tion on, switch on the compressor
and let it run for approximately 5~7
minutes to fill the sealant up to
proper pressure (refer to the Tires
and wheels on page 9-11). The
inflation pressure of the tire after
filling is unimportant and will be
checked/corrected later.
Be careful not to overinflate the
tire and stay away from the tire
when filling it.
When the tire and wheel are dam‐
aged, do not use Tire Mobility Kit
for your safety.
CAUTION
n Tire pressure
Do not attempt to drive your vehicle
if the tire pressure is below 200 kPa
(29 psi). This could result in an acci‐
dent due to sudden tire failure.
10. Switch off the compressor.