Table of Contents
Advertisement
This device complies with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation of the device.
Changes or modifications to this system by other than
an authorized service facility could void authorization to
use this equipment.
®
PASS-Key
III+ uses a radio frequency transponder in
the key that matches a decoder in the vehicle.
®
PASS-Key
III+ Electronic
Immobilizer Operation
Your vehicle has PASS-Key
Automotive Security System) theft-deterrent system.
®
PASS-Key
III+ is a passive theft-deterrent system.
The system is automatically armed when the key
is removed from the ignition.
You do not have to manually arm or disarm the system.
The security light will come on if there is a problem
with arming or disarming the theft-deterrent system.
®
III+ (Personalized
®
When the PASS-Key
III+ system senses that someone
is using the wrong key, it prevents the vehicle from
starting. Anyone using a trial-and-error method to start
the vehicle will be discouraged because of the high
number of electrical key codes.
When trying to start the vehicle if the engine does not
start and the security light on the instrument panel
cluster comes on, there may be a problem with your
theft-deterrent system. Turn the ignition off and try again.
If the engine still does not start, and the key appears to be
not damaged, try another ignition key. At this time, you
may also want to check the fuse. See Fuses on
page 5-85. If the engine still does not start with the other
key, your vehicle needs service. If your vehicle does start,
the first key may be faulty. See your dealer/retailer who
can service the PASS-Key
In an emergency, contact Roadside Assistance. See
Roadside Assistance Program on page 7-7.
It may be possible for the PASS-Key
"learn" the transponder value of a new or replacement
key. Up to 10 keys may be programmed for the vehicle.
The following procedure is for programming additional
keys only. If all the currently programmed keys are
lost or do not operate, you must see your dealer/retailer
or a locksmith who can service PASS-Key
have keys made and programmed to the system.
®
III+ to have a new key made.
®
III+ decoder to
®
III+ to
2-17
Advertisement
Table of Contents
