Tire Sealant - Chevrolet Malibu Hybrid 2008 Owner's Manual

Accessing the Tire Sealant and
Compressor Kit
To access the tire sealant and compressor kit:
1. Open the trunk. See Trunk on page 2-10 for
more information.
2. Remove the tire sealant and compressor kit by
turning the wing nut counterclockwise.
3. Remove the sealant and compressor kit from
its foam container.

Tire Sealant

When using the tire sealant and compressor kit
during cold temperatures, warm the tire sealant and
compressor kit in a heated environment such as
the vehicle for five minutes. This will help to inflate
your tire faster.
Read and follow the safe handling instructions on the
instructional label adhered to the sealant canister.
Check the tire sealant expiration date on the sealant
canister. The sealant canister should be replaced before
its expiration date. Replacement sealant canisters are
available at your local dealer/retailer. See "Removal and
Installation of Sealant Canister" later in this section.
The sealant can temporarily seal a small puncture up
to 6 mm in the tread area of the tire. The sealant cannot
seal sidewall damage, large punctures, or a wheel
that has unseated from the wheel. See Roadside
Assistance Program on page 7-7 if you need assistance.
The sealant can only be used to seal one tire. After
usage, the sealant canister and sealant/air hose
assembly must be replaced at a dealer/retailer.
See "Removal and Installation of Sealant Canister"
later in this section.
5-67