Advertisement
Jul, 1998
IDENTIFYING THE VERSION NUMBER
(1)Turn the power on while holding down
[LFO1 WAVEFORM], [NUMBER 1] and [NUMBER 3].
(2)The version number appears on the display.
(3)After checking the number, turn the power off.
SAVING AND LOADING THE USER DATA
You can save the user data to a memory card (SmartMedia).
Before perform the data saving, you must format a SmartMedia
by using the following procedure.
Format a SmartMedia
(1)Insert a 2M or 4M SmartMedia (5V type) into the card slot
in state of power off.
(2)Turn the power on.
(3)Press [EDIT].
(4)Press [INIT/UTIL]([BANK 7]) several times to select the
display of Card.
(5)Press [DEC] or [INC] several times to select "FORMAT".
Card
Menu:
(6)Press [WRITE]. The following display of confirmation
appears on the LCD.
Format CARD
OK? [WRITE/EXIT]
(7)Press [WRITE]. The format operation will be carried out.
Formatting
65% oooooo... .
(8)When formatting ends, "Completed" appears on the LCD.
Saving the user data
(1)Insert a formatted SmartMedia (5V type) into the card slot
in state of power off.
(2)Turn the power on.
(3)Press [EDIT].
(4)Press [INIT/UTIL]([BANK 7]) several times to select the
display of Card.
(5)Press [DEC] or [INC] several times to select "USER-
>CARD"
Card
Menu: USER->CARD
[WRITE]
FORMAT
[WRITE]
(6)Press [WRITE].
(7)Press [DEC] or [INC] several times to select "ALL".
Type:
(8)Press [WRITE]. The following display of confirmation
appears on the LCD.
Overwrite CARD
OK? [WRITE/EXIT]
(9)Press [WRITE]. The saving the user data operation will be
carried out.
(10)When saving all user data ends, "Completed" appears on
the LCD.
Loading the user data
(1)Insert the SmartMedia which is the data backed up in the
"Saving the user data" procedure into the card slot in state
of power off.
(2)Turn the power on.
(3)Press [EDIT].
(4)Press [INIT/UTIL]([BANK 7]) several times to select the
display of Card.
(5)Press [DEC] or [INC] several times to select "CARD-
>USER"
Card
Menu: CARD->USER
(6)Press [WRITE].
(7)Press [DEC] or [INC] several times to select "ALL".
Type:
(8)Press [WRITE]. The following display of confirmation
appears on the LCD.
Overwrite USER
OK? [WRITE/EXIT ]
(9)Press [WRITE]. The loading the user data operation will be
carried out.
(10)When loading all user data ends, "Completed" appears
on the LCD.
JP-8080
[WRITE]
ALL
[WRITE]
[WRITE]
ALL
7
Advertisement
