Olympus SP-570UZ Advanced Manual page 43

QFLASH ........................................................................
INT/EXT
#RC
SLAVE
Selecting an emission level
• When flash is set to [SLAVE], flash mode automatically changes to [#] (Fill-in flash) for all flash
modes except [$] (Flash off).
SLAVE FLASH
1
BACK SET
MENU
R (still pictures) .........................................................
OFF /ON
It automatically starts recording for about 4 seconds after shooting pictures.
When recording, aim the camera microphone at the source of the sound you want to record.
> ..................................................................
>
BLUE
RED
BACK SET OK
MENU
PICTURE MODE .......................................................
VIVID
NATURAL
Allows you to take pictures using the built-in flash or a dedicated
external flash.
g "External flash shooting" (P.82)
Allows you to take pictures using a flash that is compatible with the
Olympus wireless RC flash system.
g "Shooting with the Olympus wireless RC flash system" (P.84)
When using a commercially available slave flash that is synchronized
with the camera flash, the amount of the light emitted by the flash can
be adjusted in 10 levels.
Press 12 to select an emission level from [1] to [10], then press
o. The bigger number indicates the bigger amount of light emitted
by the flash.
• The flash can fire in sequential shooting mode, but the interval
between shots will be longer if a high emission level is set.
OK
• The white balance can be adjusted in 7 increments in both the
[BLUE] and [RED] directions.
1
: Each press makes the color more blue.
2
: Each press makes the color more red.
Press o after setting is complete.
Produces vivid colors.
Produces natural colors.
Setting to use an external flash
Recording sound with still pictures
Adjusting the white balance compensation
Adjusting the color tone of the image
43
EN