Table of Contents
Advertisement
Battery Life and Replacement
Caution
To avoid unreliable test results, replace the battery as soon
as the low battery indication appears.
Warning
To avoid possible electric shock or personal injury, turn off
the Transmitter or Receiver and disconnect all test leads
before replacing the battery.
Battery Status: "BAT LOW" LED lights up on the Transmitter
indicates the voltage is under 6.5V for powering up the device.
To replace the battery, do the following (Fig 12):
1.
Turn off the Transmitter or Receiver and disconnect all
test leads before replacing the battery.
2.
Properly installed in the case to power the Transmitter
and Receiver.
3.
Use only a 9V (6FF22) battery.
Figure 12 Replacement of the Battery
22
Advertisement
Table of Contents
