Table of Contents
Advertisement
MT-7028 Receiver：
1
2
7
1.
Probe：Used for cable tracing and NCV detection.
2.
LED illumination：Used for dark working environment.
3.
Power ON/OFF indicator：The indicator will be lighted up
when the switch at LED or NCV position and the receiver
started the functions. When the switch at OFF position,
the indicator will be light up when pushing "
cable tracing.
4.
NCV indicator：When the probe closes to the tested
object to detect the voltage, the indicator will light up if the
object carried AC90~1000V. If the indicator did not light up,
there is no voltage detected from the object or the AC
voltage is less than 90V.
5.
Signal status indicator：When doing cable mapping by
probe, if the indication LEDs (1~8) more light up, the
signal is stronger.
6.
Volume control：By adjusting the volume from high to low
to adjust the sensitivity of probe. Move the position of
receiver from 30 cm to 10cm to find out the cable you are
tracing.
4
6
10
SCAN
MT-7028
1-8 RJ45
2-7 RJ 11 6P/6C
3-6 6P/4C
4-5 6P/2C
R EC EI VER
Figure 2 MT-7028 Receiver Diagram
3
5
LED
8
OFF
NCV
11
1
2
3
4
5
6
7
8
G
9
2
9
13
12
" button for
Advertisement
Table of Contents
