Connect And Set Up - Philips HTB2510 User Manual

(USB)
c
Audio, video or picture input from a USB
storage device.
Note
•
When you connect an MP3 player to the home theater
with a 3.5mm audio cable, make sure that you connect
the MP3 player to the AUDIO IN connector, not to
the MIC connector, to ensure normal function of the
home theater.
Rear connectors
3 3
a b
a AC MAINS~
Connect to power supply.
b SPEAKERS
Connect to the supplied speakers and
subwoofer.
c AUX IN (L/R)
Connect to an analog audio output on the
TV or an analog device.
d OPTICAL-DIGITAL IN
Connect to an optical audio output on the
TV or a digital device.
e HDMI OUT (ARC)
Connect to the HDMI input on the TV.
f COAXIAL IN
Connect to a coaxial audio output on the
TV or a digital device.
g FM ANTENNA
Connect to the supplied FM antenna.
6 EN
3 8
c d e f
3 Connect and set
up
This section helps you connect your home
theater to a TV and other devices, and then set
it up.
For information about the basic connections
of your home theater and accessories, see the
quick start guide.
Note
•
For identification and supply ratings, see the type plate
at the back or bottom of the product.
•
Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
g
Connect speakers
The speaker cables are color-coded for easy
connection. To connect a speaker to your home
theater, match the color on the speaker cable to
the color on the connector.
Speaker position plays a critical role in setting
up a surround sound effect. For best effect,
position all the speakers towards the seating
position and place them close to your ear level
(seated).