Connect And Set Up; Connect Speakers - Philips HTD5520/55 User Manual

b MIC
Audio input from a microphone.
c AUDIO IN
Audio input from an MP3 player (3.5mm
jack).
Back connectors
a AC MAINS
Connect the supplied AC power cable.
b SPEAKERS
Connect to the supplied speakers and
subwoofer.
c VIDEO OUT
Connect to the composite video input on
the TV.
d AUDIO IN-AUX
Connect to an analog audio output on the
TV or an analog device.
e DIGITAL IN-OPTICAL
Connect to an optical audio output on the
TV or a digital device.
f HDMI OUT (ARC)
Connect to the HDMI input on the TV.
g FM ANTENNA
Connect the supplied antenna for radio
reception.
6 EN
3 Connect and set
up
This section helps you connect your home theater
to a TV and other devices, and then set it up.
For information about the basic connections
of your home theater and accessories, see the
quick start guide.
Note
•
For identification and supply ratings, see the type plate
at the back or bottom of the product.
•
Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.

Connect speakers

The speaker cables are color-coded for easy
connection. To connect a speaker to your home
theater, match the color on the speaker cable to
the color on the connector.
Speaker position plays a critical role in setting up
a surround sound effect. For best effect, position
all the speakers towards the seating position and
place them close to your ear level (seated).
SUB
FRONT
WOOFER
LEFT
REAR
LEFT
* The actual speaker shapes may vary from the
illustration above.
FRONT
FRONT
RIGHT
CENTER
REAR
RIGHT