Set Up Speakers - Philips HTB2510 User Manual

1
Using an optical cable, connect the
DIGITAL IN-OPTICAL connector on
your home theater to the OPTICAL OUT
connector on the TV or other device.
• The digital optical connector might be
labeled SPDIF or SPDIF OUT.
Option 2: Connect audio through a
digital coaxial cable
Best quality audio
1
Using a coaxial cable, connect the
COAXIAL IN connector on your home
theater to the COAXIAL/DIGITAL OUT
connector on the TV or other device.
• The digital coaxial connector might be
labeled DIGITAL AUDIO OUT.
Option 3: Connect audio through
analog audio cables
Basic quality audio
1
Using an analog cable, connect the AUX
IN (L/R) connectors on your home theater
to the AUDIO OUT L/R connectors on
the TV or other device.

Set up speakers

Set up the speakers manually to experience
customized surround sound.
Before you start
Make the necessary connections described in
the quick start guide, and then switch the TV to
the correct source for your home theater.
1
2
3
4
Set up EasyLink (HDMI-CEC
control)
This home theater supports Philips EasyLink,
which uses the HDMI-CEC (Consumer
Electronics Control) protocol. EasyLink-
compliant devices that are connected through
HDMI can be controlled by a single remote
control.
•
VCR
•
Before you start
•
•
Press (Home).
Select [Setup], and then press OK.
Select [Audio] > [Speaker setup].
Enter the distance for each speaker, and
then listen to the test tones and change
the volume. Experiment with the speaker
positions to find the ideal setting.
Note
Depending on the manufacturer, HDMI-CEC is known
by many names. For information on your device, see
the user manual of the device.
Philips does not guarantee 100% interoperability with
all HDMI-CEC devices.
Connect your home theater to the HDMI-
CEC compliant device through HDMI
connection.
Make the necessary connections described
in the quick start guide, and then switch
the TV to the correct source for your
home theater.
EN 9