Opticstar DS-336C XL Setup Manual page 8

Windows may display a warning prior to installing the driver software.
8.
Ignore the message and select Install the driver software anyway.
Ignore the Windows warning.
Once the drivers have been installed,
9.
Windows will identify the camera as
Opticstar 336C.
If Windows asks you to restart the
10.
computer before proceeding, please
do so.
Your camera and drivers are now
11.
installed.
Troubleshooting
guide if
installation
successfully.
Note that if later you remove the camera from your computer and
re-connect it to a different USB 2.0 port Windows will ask for the
drivers again. Repeat the above procedure to re-install the drivers
for the newly selected USB 2.0 port.
15/03/2012
Ä Opticstar Ltd
Please refer
section
the camera and
failed to
The drivers installed successfully.
to the
in this
driver
complete
7
DS-336C XL Setup Guide