C Amera C Ontrol - Opticstar DS-336C XL Setup Manual

Camera Control
Run View with the camera connected to
the computer. On the right hand side
panel of the
Capture tab, the camera will be identified
as "Opticstar 336C".
By default, the camera will be running as
soon as View opens. In order to change
the image resolution, the preview must
be stopped by clicking the Stop Preview
button. This button
Start Preview
modes.
The Default button resets the camera
settings to the default values.
Frame Rate
When lower
combined with manual exposure times,
they can increase the frame rate (frames
per second) at
operates. At full resolution, the maximum
frame rate is achievable in 8-bit mode
only.
Camera Configuration
The exposure time as well all other
camera parameters can be configured by
clicking the Advanced
button is situated
Preview / Stop Preview button.
A window will appear with three tabs:
 Color Adjust
 Explosure
 Other
 Quick Fluro
The options under each tab are outlined
in the following sections.
15/03/2012
Ä Opticstar Ltd
application, under
toggles
and Stop Preview
resolution modes
which the
button.
below the
the
between
are
Resolution
2048 x 1536
1024 x 768 BIN
camera
512 x 384 BIN
320 x 240
This
Start
10
DS-336C XL Setup Guide
Frame Rate (max)
5 frames per second
5 frames per second
5 frames per second
30 frames per second