Installing The Software Drivers - Opticstar DS-336C XL Setup Manual

Installing the Software Drivers

Follow the instructions below closely ensuring that you make the right
selections.
Un-install any previous versions of the software.
1.
Insert the supplied CD in the CD/DVD drive.
2.
During installation do not allow Windows to automatically select the
best drivers. If you allow Windows to automatically select the
drivers, installation will fail.
Plug the camera to a USB2.0 port
3.
(ideally to one attached directly on
the motherboard of your computer).
The Windows Device Manager will list the camera as 3.1M CCD
4.
USB2.0 Camera as shown below.
Once connected to the computer, the
Device Manager will show the camera
15/03/2012
Ä Opticstar Ltd
The software drivers can be installed by
the user from the Device Manager.
.
5
DS-336C XL Setup Guide