Signal Connections - Profile California 400SX Installation And Owner's Manual

Connect the RCA output of the head unit (AM/FM cassette player, CD, or DAT)
to the RCA input terminals of the amplifier.
To make these connections, we recommend high quality RCA cables, which are available at your
local car audio retailer. Run signal wires away from electrical wires to avoid possibility of
induced noise from the car's electrical system (i.e. popping noises or engine noise). Please note
that when making these connections the signal inputs correspond with the speaker outputs.
For example: If you connect the radios front right RCA to "CH 1".......then speaker output
"CH 1" will operate the front right speaker.
Hi-Level Input
Input
L+ L- R+ R-
Left
Right
FOUR CHANNEL SIGNAL CONNECTIONS
(RADIO WITH FRONT AND REAR OUTPUTS)
Bass
X-over
Boost
85
Filter
Low Hi
0 12 40 130 Off Min
94.7 94.7
S
IGNAL CONNECTIONS
TWO CHANNEL SIGNAL CONNECTIONS
Level
Low Hi
Min Max Off
94.7 94.7
R R L L
L L R R
Level Input
CH1 CH3
Max Min
CH2 CH4
FOUR CHANNEL SIGNAL CONNECTIONS
(RADIO WITH ONLY ONE SET OF RCA'S)
R R L L
Connect 2 sets of RCA "Y"adaptors to split
the two RCA's from the radio into 4 outputs
(Not Provided)
7
Bass
X-over
Boost Level Input
85
Filter
CH1
Low Hi
0 12 40 130 Off Min Max
CH2
94.7 94.7
FRONT REAR
CH3
Min
CH4
R R L L