Mounting Location - Profile California CA1200 Installation Instructions & Owner's Manual

Before you start the installation, it will be necessary to find a mounting location for the
amplifier. Find a location in which the amplifier will receive adequate ventilation in order to
dissipate the heat it develops during operation. Two popular mounting locations are in the
trunk or under the seat.
Select the location in which you wish to mount the amplifier. Use caution when mounting
amplifier, there are many wires, gas lines, vacuum lines, brake lines as well as a gas tank in
the automobile. Make sure you know where they are when mounting the amplifier to avoid
puncturing lines, shorting wires or drilling holes in the gas tank. Once you are ready, use a
pencil to mark the mounting holes in the bottom panel. After you have marked the locations of
the holes move amplifier out of the way and drill small starter holes to make the tapping
screws easier to install. Use provided screws to tighten down the amplifier.
M
OUNTING LOCATION
Bass
X-over
CA 640 CA 640 Boost Level
85
Filter
Low
Hi
0 12 40 500 Min
Off
CH4 CH2
X-over
Level
85
Filter
CH3 CH1 Low
Hi
Max Min Max 40
Off
7
Bass
Boost
PROTECTION
POWER
500 0 12