Speaker Connections - Profile California CA1200 Installation Instructions & Owner's Manual

Make the speaker connections using speaker wire that is at least 14 gauge or
heavier.
As with any audio component, proper phasing of the amplifier and speakers is essential for
strong bass response. When connecting, make sure that positive (+) from the amplifier is
connected to the positive (+) of the speaker, and the same for negative (-).
TWO CHANNEL

SPEAKER CONNECTIONS

B+ REM GND
Fuse
+ + - -
FOUR CHANNEL SPEAKER CONNECTIONS
Front Left Front Left
S
PEAKER CONNECTIONS
Bridged
Speaker
Output
L R
4 Ohm Speakers 4 Ohm Speakers
- -
+ +
(2 Ohm Minimum) (2 Ohm Minimum)
CH3
CH1
Bridged
CH1 CH2
Bridged
CH3 CH4
- - + +
+ +
Rear Left Rear Left
4 Ohm Speakers 4 Ohm Speakers
(2 Ohm Minimum) (2 Ohm Minimum)
CA400 & CA600M
SPEAKER CONNECTIONS
CH4
B+
CH2
Fuse
Speaker
Output
- -
+ +
Rear Right Rear Right
(2 Ohm Minimum) (2 Ohm Minimum)
10
Speaker
Output
4 Ohm Speaker 4 Ohm Speaker
- - (2 Ohm Minimum) (2 Ohm Minimum)
+ +
REM GND
- -
- - + +
Front Right Front Right
4 Ohm Speakers 4 Ohm Speakers
Fuse
B+