Flexible Zone - Siemens EH8***SN1 Series Instruction Manual

Flexible zone

It works as follows
Advice on using cookware
Consisting of two
independent zones
How to activate
18
This may be used as one complete hotplate or two
individual hotplates depending on the actual cooking
needs.
It consists of several independently controlled
inductors. When the zone is working, those inductors
that are not covered by cookware are automatically
turned off.
To ensure that the cookware is detected and heat is
distributed evenly, correctly centre the cookware:
in the upper or lower part of the flexible zone,
H
when the cookware is smaller than 13 cm.(see
diagram)
or in one of the two halves of the flexible zone,
H
when the cookware is larger than 13 cm. (see
diagram)
When using cookware of a different size or made of a
different material, noise and vibrations that do not
affect correct working of the zone may occur.
The flexible zone can be used normally as two
independent hotplates.
See the section on adjusting the hotplate.