Siemens EH8***SN1 Series Instruction Manual page 15

Adjusting the heat setting:
To change the heat setting
Switching off the hotplate
The hotplate must be connected.
1.
Select the hotplate:
Touch the programming zone for the required
hotplate.
2.
In the next 10 seconds, slide your finger along the
programming zone until the required heat setting
lights up.
Slide your finger along the programming zone until the
required heat setting is displayed.
Warning:
The selected heat setting will flash if no pan is placed
on the induction hotplate.
After a certain time, the hotplate switches off.
Select heat setting 0 in the programming zone.
The hotplate is switched off and after about 10
seconds, the residual heat indicator appears.
15