ABB COM600S User Manual page 40

40
COM600 series, Version 4.1
Modbus TCP Master (OPC) User's Manual
•
BIT_DPU_MCD_SBO
• BIT_DPU_IN_REGISTER_SBO
Table 3.4.8.8-1 Configurable DPC properties for OPC servers with Modbus device
Property/Para- Value or Value range/ Default
meter /Example
Basic
61850-Type DPC
Sub-Type
Sub Type BIT_DO
SACE
Addresses
Address For Com- 0 to 65535
mand
Default: 0
Address For Status 0 to 65535
and Intermediate
Default: 0
Bit Mask For Inter- 0 to 65535
mediate Status
Default: 0
Bit Mask For Status 0 to 65535
Default: 0
Close Command 0 to 65535
Type
Default: 0
Close Control Coil 0 to 65535
Default: 0
Close Indication 0 to 65535
Coil/Input
Default: 0
Command Para- 0 to 65535
meter
Default: 0
Description
61850-Type
Sub type for command.
Holding register address for the control.
Holding register (4x reference) address
range 40001 to 49999. Address 0 equals
to no information available.
Holding or input register address for the
open, close, and intermediate indication.
Holding register = 4x reference address
range 40001 to 49999 or input register =
3x reference address range 30001 to
39999. Address 0 equals to no information
available.
Bit mask for intermediate status.
Bit mask for status.
Close command type.
Coil address for the close control. Coil (0X
reference) address range 1 to 9999.
Address 0 equals to no information avail-
able.
Coil or input address for the close indica-
tion. Coil (0X reference) address range 1
to 9999 or input (1X reference) address
range 10001 to 19999. Address 0 equals
to no information available.
Command parameter.
1MRS756445