Protection Activation Information (Act) - ABB COM600S User Manual

3.4.8.2.
3.4.8.3.
30
COM600 series, Version 4.1
Modbus TCP Master (OPC) User's Manual

Protection activation information (ACT)

Table 3.4.8.2-1 Configurable ACT properties for OPC Servers with Modbus IED
Device
Property/Para- Value or Value range/ Default
meter /Example
Basic
61850-Type ACT
Sub Type BIT
Addresses
Neutral Coil/Input 0 to 65535
Default: 0
Neutral Coil/Input 0 to 65535
Default: 0
Phase A Coil/Input 0 to 65535
Default: 0
Phase B Coil/Input 0 to 65535
Default: 0
Phase C Coil/Input 0 to 65535
Default: 0
Analogue set point (APC)
Table 3.4.8.3-1 Configurable ACP properties for OPC servers with Modbus IED,
subtype REGISTERED_BASE
Property/Para- Value or Value range/ Default
meter /Example
Basic
61850-Type APC
Description
61850-Type
Sub Type for the object
Coil or input address for General informa-
tion. Coil (0X reference) address range 1
to 9999 or input (1X reference) address
range 10001 to 19999. Address 0 equals
to no information available.
Coil or input address for Neutral informa-
tion. Coil (0X reference) address range 1
to 9999 or input (1X reference) address
range 10001 to 19999. Address 0 equals
to no information available.
Coil or input address for Phase A informa-
tion. Coil (0X reference) address range 1
to 9999 or input (1X reference) address
range 10001 to 19999. Address 0 equals
to no information available.
Coil or input address for Phase B informa-
tion. Coil (0X reference) address range 1
to 9999 or input (1X reference) address
range 10001 to 19999. Address 0 equals
to no information available.
Coil or input address for Phase C informa-
tion. Coil (0X reference) address range 1
to 9999 or input (1X reference) address
range 10001 to 19999. Address 0 equals
to no information available.
Description
61850-Type
1MRS756445