Vertical Steam - Proctor-Silex 17130 Use & Care Manual

840153200 Ev05.qxd 8/9/06
How to Dry Iron
1. Turn the Adjustable Steam Dial to
2. Turn Temperature Control Dial to desired temperature.
Allow two minutes for iron to reach desired temperature.
How to Steam Iron
1. Unplug iron. Using a cup, slowly pour tap water into water
tank opening until MAX fill line is reached. Plug iron into outlet.
2. Turn Temperature Control Dial to desired setting in the steam
range. Allow two minutes for the iron to reach desired temperature.
3. Turn the Adjustable Steam Dial to desired steam setting.
Water: Please use ordinary tap water. If you have extremely hard
water, alternate between tap water and distilled water for use in
the iron.
8:42 AM Page 6
.
6
Features
Spray and Blast of Steam Buttons
Push Blast Button for an extra blast of
steam. Do not press Blast Button more
than every 5 seconds. Push Spray Button
to release a fine spray of water for difficult
wrinkles in cotton or linen.

Vertical Steam

1. Follow Steps 1 through 3 in "To Steam Iron."
2. Hang garment in a location that is not susceptible to
damage from heat or moisture. Do not hang in front of
wallpaper, window, or mirror.
3. Hold iron about 6 inches away from garment and press
and release Blast of Steam Button to steam out wrinkles.
Do not press Blast of Steam Button more than once every
2 seconds.
4. To turn iron off, turn Temperature Control Dial to OFF ( O ).
Unplug iron.
5. Empty water from the iron following directions in "Caring
for Your Iron."
NOTE: Do not allow hot soleplate to touch delicate garments.
Spray Steam
7