Disassembly Of Ac Inlet P.c.b - Panasonic SA-AK785LM-K Service Manual

9.25. Disassembly of AC Inlet P.C.B.

• Follow (Step 1) to (Step 5) of Item 9.3
Step 1 : Remove 1 screw.
Step 2 : Release the tab at the Rear Panel as arrow show.
Step 3 : Cut 2 tie wraps.
Caution : Remember to tie the red, black, blue wires with
the wraps to the bottom chassis as diagram show.
Step 4 : Remove 2 screws on AC Inlet P.C.B..
Step 5 : Lift up AC inlet P.C.B. from bottom chassis.
Caution: During assembling, ensure the AC Inlet P.C.B. is
seated properly at the locator, screw 2 screws at AC Inlet
P.C.B..
Step 6 : Turn over AC Inlet P.C.B. to the solder side.
Step 7 : Desolder black wire pin & red wire pin on AC Inlet
P.C.B..
Step 8 : Remove the AC Inlet P.C.B..
68