Settings" Menu - Beko METPOINT OCV Instructions For Installation And Operation Manual

7 Installing and setting METPOINT
This chapter describes the connections and settings that must be made for the METPOINT
DATA LOG software to operate properly.
NOTE!
Administrator rights are mandatory for installing the METPOINT
software. Please make sure that you are provided with the appropriate permissions.
Please call on the assistance of appropriately trained and authorised technical staff.
7.1

"Settings" menu

The settings that are required for connecting METPOINT
connecting directly to a PC or notebook are made in this menu.
As a rule, two options are available here:
• automatic connection by DHCP
• manual configuration
Note to the network administrator
Communication via a network between METPOINT
®
METPOINT OCV DATA LOG software only if both are in the same subnet. You can
find out in the manual for your router whether and how the forwarding function is
executed in your router.
Requisite firewall settings:
HTTP:
in addition:
FTP connection:
It is also possible to manually establish an FTP connection to a device in another
subnet. Please contact your network administrator.
"metpoint" for the user name and "logfiles" for the password must be specified as the
login data.
mdi - Manufacturers Distributor, Inc Phone: (727) 835 - 0670 | Fax: (813) 571 – 0422 www.BekoSales.com | Sales@BekoSales.com
®
OCV DATA LOG
Enable port 1111 (in- and outbound)
Enable port 5000 (TCP) for device update
Port 21 (TCP) (outbound for passive only)
Port 21 (TCP) (in- and outbound for active)
®
OCV DATA LOG
®
OCV into an in-house network or for
®
OCV and a PC works with the
®
OCV