System And Function Description - Beko METPOINT OCV Instructions For Installation And Operation Manual

4 System and function description

®
The METPOINT OCV DATA LOG software is used for displaying, remotely analysing and storing
the measured values collected using METPOINT
Displaying and storing the measured values for residual oil content ascertained using METPOINT
OCV can be done on a directly connected notebook/PC and on a notebook/PC connected via the
web.
As a result, the measurement can be tracked on the notebook/PC.
Every measured value from the current collection of data can be read. This also makes it possible
to monitor the measured values over an extended period of time.
In addition, the program provides the means for updating the measurement device software and
makes establishing an FTP connection to the device easier.
5 System requirements
Network:
Storage space for network
Supported operating systems
Minimum hardware
Storage space for software:
Interface:
mdi - Manufacturers Distributor, Inc Phone: (727) 835 - 0670 | Fax: (813) 571 – 0422 www.BekoSales.com | Sales@BekoSales.com
®
OCV.
.NET Framework 4 (if not present, is automatically installed
before the program)
280 MB
Microsoft Windows XP
Microsoft Windows Vista
Microsoft Windows 7
Suitable for the particular operating system used
25 MB
Ethernet interface
®