Language Selection - Beko METPOINT OCV Instructions For Installation And Operation Manual

8.2.2

Language selection

®
The METPOINT OCV DATALOG program is available in two languages. A language selection
can be made between German and English.
The current language setting is indicated in the right upper corner of the screen.
Use the drop-down menu to change the language setting by clicking on the desired language.
After successful change, the following note appears:
The language selection will automatically be adapted when program is restarted.
mdi - Manufacturers Distributor, Inc Phone: (727) 835 - 0670 | Fax: (813) 571 – 0422 www.BekoSales.com | Sales@BekoSales.com