Table of Contents
Advertisement
WARNING:
Do not attempt to insert the USB connector to the USB socket
of the AC power adapter while the AC power adapter is plugged
into the wall outlet. To prevent electrical shock hazard,
disconnect the AC power adapter from the wall outlet before
completing step #3 above. Do not pull on the USB cable to
disconnect from the AC power adapter, the move can cause
severe damage to the cable; leaving the charger plugged alone
into the power socket may result a fire.
NOTE:
There are two ways of adjusting the amplified sounds of the
device, either manually or remotely. The instructions below will
let you master the device for achieving optimum quality of
amplified sounds out of the device.
Adjust sound volume using manual methods:
There are two buttons on the back of the device casing for
regulating the amplified sound volume - the one marked
with (+) is for tuning "UP" the amplified sound volume,
whereas the other that marked with (-) is for tuning "DOWN"
the amplified sound volume. Through using the tip of your
index finger to press between these buttons will digitally
fine tune the amplified sounds to your desired level.
Adjust sound volume using the remote control:
The remote controller is battery operated has its electronics
encased in a white plastic housing with a removable belt
clip on the back, may be operated as a stand alone unit or
unfolded onto the groove of the wrist strap as a complete
remote controller. The setup is very handy, the wearer does
not require to remove the device from behind the ear while
adjusting sound volume. See illustrations the next page.
- 7 -
Advertisement
Table of Contents
