Table of Contents
Advertisement
Adjust sound volume using the remote control (cont'd):
Use the remote controller with the belt clip on it for increasing
the amplified sound volume press directly the volume control
button (+) on the remote controller; vise versa, for reducing
the amplified sound volume press directly the volume control
button (-) on the remote controller.
Install the remote controller onto the wrist strap:
(1) Remove the belt clip by sliding off the holder plate from
the bottom of the remote controller. See illustrations below.
(2) When the remote controller is placed onto the groove of
the wrist strap, let the side come with the Infrared sensor be
facing up, this will ensure the volume +/- regulating buttons
of the remote controller synchronized with the membrane
switches of the wrist strap. See illustrations on the next page.
NOTE:
The remote controller is battery operated requires two LR44/
AG13 battery cells to power up; the battery compartment is on
the back of the controller with a sliding battery door.
- 8 -
Advertisement
Table of Contents
